I think the main thing they wanted to accomplish
is insuring that the amp wouldn't get turned on while the
AC cycle was at or near maximum voltage.
While the concerns are valid, can't really argue
with the point that they've used them throughout
the production life of those amps and the system has
worked.
Mark WB8JKR
On Fri, 26 Mar 2004 19:09:15 -0800 Bill Turner <wrt@dslextreme.com>
writes:
> On Fri, 26 Mar 2004 20:48:01 -0600, Phil Clements wrote:
>
> >hey are smooth, but too fast to be used alone without other
> >components on a capacitor input power supply. It takes time to
> charge
> >the filter capacitor(s). I'll bet there is more to the Commander
> >between the mains input and the power transformer than just a
> relay.
>
> _________________________________________________________
>
> You'd lose that bet. The schematic shows nothing but the SSR's and
> fuses between the mains input and the HV transformer. The HV meter
> goes
> from zero to 3kv in the blink of an eye, just as you'd expect. No
> thumps, no light dimming, nothing but net.
>
> --
> 73, Bill W6WRT
> QSLs via LoTW
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
________________________________________________________________
The best thing to hit the Internet in years - Juno SpeedBand!
Surf the Web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|