? -- Bil -- The higher-freq. bands use Cu-tubing conductors. My
guess at the 10m conductor is c. 3/8" tubing. Also worth noting is
that the TL-922 pulls cooling air through the tank inductors and the
output bandswitch.
cheers
>On Fri, 19 Mar 2004 12:22:10 -0800, R.Measures wrote:
>
>>A good example of
>>an amplifier with adequate skin-effect compensation is the TL-922.
>
>_________________________________________________________
>
>Could you (or anyone) provide the wire size of the TL-922 tank coil,
>especially the ten meter section? May as well homebrew it right.
>
>--
>73, Bill W6WRT
>QSLs via LoTW
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|