Amps
[Top] [All Lists]

Re: [Amps] Anyone ever use a 6C21?

To: "R. Measures" <r@somis.org>,"Mark Foltarz" <Foltarz@rocketmail.com>," AMPS" <amps@contesting.com>
Subject: Re: [Amps] Anyone ever use a 6C21?
From: "Barrie Smith" <barrie@centric.net>
Date: Thu, 6 Nov 2003 20:18:43 -0700
List-post: <mailto:amps@contesting.com>


> ***  A triode with a Mu of 38 is OK for linear service, but only in g-g
> configuration, However, the drive requirement would be higher than it
> would be for high-Mu tubes.

That's interesting, Rich.

Previously, you mentioned a plate voltage of something on the order of 8 KV
for linear service.  I'm thinking that the 6C21/450 would be a "fun" 160M
only amp.

Given that I do have sufficient drive, what do you suppose the power out
would/could be with 8 KV on the plate?

TNX, Barrie, W7ALW
>


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>