I don't like the 1 inch spark plug anode being that close. If you ever have
a parasitic problem...look out. Maybe some corona dope on the top of the
cap and the bottom of the lid would give you a little more safety. I once
painted a variable cap with that stuff and it worked nicely.
Geo W7LFD
|-----Original Message-----
|From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
|Behalf Of Jim Isbell
|Sent: Saturday, June 14, 2003 9:59 AM
|To: Mail list Amplifiers
|Subject: [Amps] Anode clearance and Chassis WANTED
|
|
|I am building a 4-1000A linear and will have 4KV on the anode. What is
|the MINIMUM clearance I must have from the anode to the top of the metal
|cabinet? It looks like it will be about 1" in my present configuration.
| Will that be sufficient to prevent any problems?
|
|I am looking for a chassis 14"x13.25"x3.25".........may have to go to a
|shorter one if the answer to above question is NO but really need the
|3.25" for the input tuning box to fit.
|
|_______________________________________________
|Amps mailing list
|Amps@contesting.com
|http://lists.contesting.com/mailman/listinfo/amps
|