>Probably the simplest and most repeatable way to monitor inter mod is to
>just switch your receiver to the opposite side band. Im products are
>going to fall on the opposite side band as well as on the wanted side
>band. On the opposite side band you don't have the wanted signal
>components to interfere with hearing the IM products.
The ARRL IMD testing graphs show that the IMD products are not exact mirror
images as they appear on either side of the center frequency and may vary
by 5 DB or so, that's probably OK if the rig is healthy, but what if there
is some asymmetrical distortion?
--
Zyg AF4MP
Roswell GA USA
|