[AMPS] Grounding Screen of 4CX-1000

Amps

[AMPS] Grounding Screen of 4CX-1000

from [Lamb]

To:	<amps@contesting.com>
Subject:	[AMPS] Grounding Screen of 4CX-1000
From:	k7fm@teleport.com (Lamb)
Date:	Tue, 18 Dec 2001 10:10:29 -0800

Real cheapskates (me - 25 years ago) can use this technique to mount a
4CX-1000 with no socket at all.  This is useful because there are no cheap
sockets for the 4CX-1000.

Cut a hole for the tube and airflow.  Use a plate parallel with the chassis
to lock the screen ring to ground.  Fabricate clips for the other rings and
connect to them below chassis.  Then fire it up.  It works.  Harder than
heck to change tubes, though, since that requires disassembly of the
chassis.

My techniques have changed today.

73,  Colin  K7F<


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Bypassing Screen of 4cx800a for 50 MHz, (continued) [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Frank Ayers [AMPS] Bypassing Screen of 4cx800a for 50 MHz, W9GT Fw: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, W9GT Message not available [AMPS] Bypassing Screen of 4cx800a for 50 MHz, W9GT [AMPS] Bypassing Screen of 4cx800a for 50 MHz, yo9fzs [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Steve Thompson [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Lamb [AMPS] Bypassing Screen of 4cx800a for 50 MHz, W9GT [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2 [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Michael J. Tubby B.Sc. (Hons) G8TIC [AMPS] Grounding Screen of 4CX-1000, Lamb <= [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2 [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Steve Thompson [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Michael J. Tubby B.Sc. (Hons) G8TIC [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2 FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Peter Chadwick FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2 FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, <g3sek@ifwtech.com (Ian White, G3SEK) FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2 FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Peter Chadwick

Previous by Date:	[AMPS] Inductors, Tom Rauch
Next by Date:	[AMPS] Bypassing Screen of 4cx800a for 50 MHz, Steve Thompson
Previous by Thread:	[AMPS] Bypassing Screen of 4cx800a for 50 MHz, Michael J. Tubby B.Sc. (Hons) G8TIC
Next by Thread:	[AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2
Indexes:	[Date] [Thread] [Top] [All Lists]