> >Just like to know if you have done modifications for SB-200 linear to get it
> >operational on 10MHz??
>
> // 10MHz requires a bandswitch with an additional contact because 10MHz
> is too far from from 7MHz or 14MHz to allow sharing bands -- such as
> 12m/10m.
>
> >Any instruction available? Also interested to add
> >1,8MHz. All hints are very welcome!
> >
> // 1.8MHz is difficult to add to a SB-200 because, unlike the SB-220,
> there is not much room for the added L, Tune-C, and Load-C padders.
Why not buy two SB-200's? Nice ones go every day on E-Bay for around $250.
Put one on 160-80-40, and the other on 20-17-15-12-10?
(((73)))
Phil, K5PC
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|