Hi Jim,
K2AW Silicon Alley telephone (516) 334-7024. "Same day shipping." 8kV,
250A surge modules = $10.00/each. They're not large, I cannot imagine a
"board" version being any smaller.
73, Jim!
Steve WB2WIK/6
> Hi Steve,
>
> >I surely wouldn't bother with the setup costs of prototyping PC boards
> for
> >an array of diodes...the off-the-shelf prototype boards in all the
> >electronics hobby stores will do the job just fine.
>
> As much as it pains me, you're right. It isn't worth $135 or so
> for a pretty board to hold some silly diodes in place. I'll
> probably hand-etch and drill a board, though. Perfboard and
> I don't get along all that well.
>
> Also, I hadn't considered the K2AW modules; didn't know he was
> still in business. The board would be a lot smaller, and since
> it will bolt to the filter cap studs, smaller is better.
>
> Thanks,
> Jim, N7CXI
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|