[AMPS] Problem with Henry 2KD

[2@vc.net (2)]

> ...  Also 1 tube lights up a lot more than the other (very noticable).  

This is usually caused by poor solder connection inside the filament pins 
[#1 & #5] and/or resistive contact between the socket and the pin.  

-  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com