I did this with the tube in place.
KRS
----- Original Message -----
From: Jeff Wolf <da_kang@hotmail.com>
To: <superiorwavelength@prodigy.net>; <amps@contesting.com>
Sent: Monday, March 12, 2001 9:18 PM
Subject: Re: [AMPS] 3CX3000A7
>
> >A question was ask on how I determined the value of the resistor to >use.
> >I took the tube manufacture data sheet used the resonant load >impedance
> >and driving impedance values. Simply took that value in a >carbon
> >composition resistor and attached them to the circuit in there
>prospective
> >location, I gave the MFJ what it wanted to see in order to >achieve a
> >resonant circuit.
> >I hope that made sense.
>
>
>
>
>
> I hope you either did this with tube in place, or used another capacitor
to
> simulate the Cin, Cout and Cstray.
>
> Otherwise, we might have just found your problem :)
>
>
>
> Toll_Free
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|