> >If you can adjust driving power to obtain the desired out, the CW
> >position becomes basically meaningless, expecially if considering
that
> >tubes work better at 3Kv plate voltage.
>
> CW has c. 2x the duty-cycle of SSB. The SB-220's HV transformer is
too
> light for CW on the SSB tap. The same thing is true for the TL-922.
>
> ciao, Mauri.
>
> - Rich..., 805.386.3734, www.vcnet.com/measures.
> end
Reducing the drive power and consequently the output power, the RMS
developed for a stated duty cycle is accordingly reduced.
Ciao, Rich
73,
Mauri
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|