Hi All,
Speaking of the Clipperton-L, we have one at my workplace club station which is
currently
dedicated to the 160 meter station. On 160 meters I was able to get about 900
watts output
when I really pushed it with the FT-1000D. Is this typical, or is the amp
capable of more? Are
there any modifications that I should be considering?
Thanks,
Mike, W4EF...........................
----- Original Message -----
From: "Peter Chadwick" <Peter_Chadwick@mitel.com>
To: "Bill Aycock" <baycock@HIWAAY.NET>; "amps" <amps@contesting.com>;
"'measures'" <2@vc.net>
Sent: Monday, January 22, 2001 12:05 AM
Subject: RE: [AMPS] Clipperton L amplifier
>
> Rich said:
>
> >HF g-g amplifiers are quite unlikely to oscillate below
> >the grid resonance. For a 3-500Z, this is c. 80MHz.
>
>
> The original comment was about shielding the screen
> supply...... hardly applicable to 3-500Zs.
>
> 73
>
> Peter G3RZP
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|