[AMPS] SB220 power output

To:	<amps@contesting.com>
Subject:	[AMPS] SB220 power output
From:	Eric Moore" <emoore@windemullerelectric.com (Eric Moore)
Date:	Thu, 14 Dec 2000 10:42:45 -0500

FWIW

snip....
> better to oil too often than too little.
snip....

An ounce (well maybe a drop or two) of prevention is worth a pound of (or
$250 worth of tubes in this case) cure!

73,
Eric
K8CCA



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] SB220 power output, Bill Bennett N7DZ [AMPS] SB220 power output, Tom Rauch [AMPS] SB220 power output, measures [AMPS] SB220 power output, Peter Chadwick [AMPS] SB220 power output, i4jmy@iol.it [AMPS] SB220 power output, measures [AMPS] SB220 power output, Jaime P.Ullívarri [AMPS] SB220 power output, Peter Chadwick [AMPS] SB220 power output, measures [AMPS] SB220 power output, <emoore@windemullerelectric.com (Eric Moore) <= [AMPS] SB220 power output, measures

Previous by Date:	[AMPS] SB220 power output, measures
Next by Date:	[AMPS] 2m amplifier - many thanks!, Phil
Previous by Thread:	[AMPS] SB220 power output, measures
Next by Thread:	[AMPS] SB220 power output, measures
Indexes:	[Date] [Thread] [Top] [All Lists]