>
>Hi Rich,
>Where you are suppose to make the holes on the fan, exactly?
>73, Jaime EA6NB
>
Directly above the motor shaft, about 1cm in. . Do not drill deep. Use
c. #55 drill.
>} -----Mensaje original-----
>} De: owner-amps@contesting.com [mailto:owner-amps@contesting.com]En
>} nombre de measures
>} Enviado el: Thursday, December 14, 2000 13:31
>} Para: Peter Chadwick; Amps List
>} Asunto: RE: [AMPS] SB220 power output
>}
>}
>}
>} >
>} >Rich said:
>} >
>} >>The SB-220 has a clearly superior cooling system -- provided
>} >>that the fan bearings are routinely oiled every 1000 or so hours.
>} >
>} >What sort of bearings are they?
>}
>} Oilite
>}
>} >I would have expected a plain bearing made from
>} >'oilite' to do a lot better than 1000 hours between oilings.
>}
>} For me, 1000 hours is several years of operating.
>}
>}
>} cheers, Peter
>}
>} - Rich..., 805.386.3734, www.vcnet.com/measures.
>} end
>}
>}
>} --
>} FAQ on WWW: http://www.contesting.com/FAQ/amps
>} Submissions: amps@contesting.com
>} Administrative requests: amps-REQUEST@contesting.com
>} Problems: owner-amps@contesting.com
>}
>}
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|