On my opinion, for Hi power applications best available connectors are
EIA flange connectors (7/8", 1-5/8" etc.) that are built for a lot of
cables, from the small RG213 and up to 7/8" lines, and even larger,
with the benefit that they are nowadays used, produced by a number of
different manufacturers and currently found on flea markets.
Generally speaking, anyway, there's not a great meaning to use large
power connector with small cables. An exception, but for specialyzed
applications like indoor test or baluns, could be relatively short runs
of teflon cables like RG393.
73,
Mauri I4JMY
> ---------- Initial message -----------
>
> From : owner-amps@contesting.com
> To : da_kang@hotmail.com,
amps@contesting.com, "'DF3KV@aol.com'" <DF3KV@aol.com>
> Cc :
> Date : Wed, 29 Nov 2000 10:33:39 -0000
> Subject : RE: [AMPS] Hi Power Connectors
>
>
> Peter says:
>
> >Type C is not produced anymore.
>
> Amp still do - see the tyco electronics web page
>
> http://catalog.tycoelectronics.com/
>
> 73
>
> Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|