>
>
>> So, Chuck, your "mindless parroting" wasn't so far off base. I haven't
>> looked to be sure, but my AL-1200 acts like it does not have sequenced
>> relays (there seems to be just one T/R relay that is just marginally fast
>> enough), so the ALC approach (and the PTT approach) might make sense for
>> that application. When I put a VFD or WinWatt between my 756PRO and the
>> AL-1200, I get a momentary VSWR alarm as the AL-1200 T/R relay pulls in.
>
>Pull in time is about 10 mS. This is typical of amps that don't use
>vacuum relays....like the TL-922, Heathkits, Drakes, Dentrons, etc.
>
The TL-922 relay is closer to 20mS.
>The relay is sequenced,
One relay, sequenced -- [guffaw].
.....
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|