>
>> One of the problems with many of the swr protection circuits is that when
>> there is a direct short the measured reflected power may be zero - simply
>> because there is no voltage present because of the short.
>
>I've never seen an SWR shutdown system (directional coupler) that
>measures only voltage, and reads zero when the output is shorted.
>
Bingo.
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|