| To: | <amps@contesting.com> |
|---|---|
| Subject: | Fwd: Re: [AMPS] Some tube questions...conversion to H2O cooling |
| From: | Wlfuqu00@pop.uky.edu (William Fuqua) |
| Date: | Wed, 20 Sep 2000 14:26:27 -0400 |
The 4X150's, 4X150A's and 4X150A/7034's are different tubes.
The 4X150A/7034 has ceramic base around the pins and glass between the
anode and base. Also, it is spec'ed at 250 watts dissipation.
Look it up..
73
Bill wa4lav
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [AMPS] Some tube questions...conversion to H2O cooling+, N6BUU@aol.com |
|---|---|
| Next by Date: | [AMPS] BC610... no 833's, Jim Reid |
| Previous by Thread: | [AMPS] Some tube questions...conversion to H2O cooling, Lamb |
| Next by Thread: | [AMPS] Some tube questions...conversion to H2O cooling, Steve Thompson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |