Amps
[Top] [All Lists]

[AMPS] Some tube questions...conversion to H2O cooling

To: <amps@contesting.com>
Subject: [AMPS] Some tube questions...conversion to H2O cooling
From: 2@vc.net (measures)
Date: Wed, 20 Sep 2000 10:35:06 -0700
>
>Bill wrote:
>
>< snip >
>
>>      However, the real bargains are the 4X150A/7034. They sell cheap
>> because people don't want 150 watt plate dissipation tubes, but they
>> have the same specs and characteristic curves as the 4CX250B.
>
>Many moons ago, an engineer at Eimac in San Carlos told me "if you 
>supply enough air to keep their temperature within spec, the 4x150a's 
>are good for 250 watts dissipation."  
>
As I understand it, too much air is indicated when the tubes blow out of 
the sockets. 

cheers, George.  

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>