Amps
[Top] [All Lists]

[AMPS] TL-922

To: <amps@contesting.com>
Subject: [AMPS] TL-922
From: 2@vc.net (measures)
Date: Thu, 7 Sep 2000 19:45:27 -0700
>
>> What precisely is/are the "bad" components in the stock TL-922 that cause
>> instability?  By changing the stock suppressors with nichrome wire (ala
>> Rich's description), the problem goes away.  So, please tell me exactly
>> which component(s) you would change to cure the stock TL-922.
>> 
>> 73, Don  (ki6sz)
>
>Bad was a poor choice of words. I replace the defective 
>components.
>
>I take it what you are telling me is you can take a non-working 
>amplifier, replace only the suppressors and nothing else, and it is 
>problem free? Is that what you are saying? Or do I misunderstand 
>you?
>
duhh

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>