>
>Rich,
>
>>Because the blower photo on their web site showed a low pressure design
>>instead of a high pressure design. 12 miles from here, there is a
>>manufacturer who makes high pressure blowers.
>>
>>>But I would have thought that there were many blower manufacturers
>>>nearer to you in the US than this UK based company !
>>>
>>>I am only trying to help a fellow Ham. I do not know the spec's for a
>>>YC125 nor the required air flow and static back pressure !!
>>>You could enlighten me.... then I may be come a better person.
>>
>>As I recall, c. 1" However, needed SP depends on emission type. A spec
>>sheet would reveal what one needs to know.
>>end
>Can I take it that the Radial Wheel blowers are a high pressure design?
Yes. Kooltronics Radial Wheel blowers deliver serious pressure.
>I believe you mentioned in a previous thread that these were also
>comparatively quiet?
>
They are noisier than low pressure types. The Rotron centrimax blowers
are quiet, but not cheap.
>I have e-mailed both Kooltronics in the US and Airflow here in the UK so
>I'll see what comes back.
>
On the Kooltronix web site they have graphs of flow vs pressure for each
model.
cheers, Phil
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|