Rich,
>Because the blower photo on their web site showed a low pressure design
>instead of a high pressure design. 12 miles from here, there is a
>manufacturer who makes high pressure blowers.
>
>>But I would have thought that there were many blower manufacturers
>>nearer to you in the US than this UK based company !
>>
>>I am only trying to help a fellow Ham. I do not know the spec's for a
>>YC125 nor the required air flow and static back pressure !!
>>You could enlighten me.... then I may be come a better person.
>
>As I recall, c. 1" However, needed SP depends on emission type. A spec
>sheet would reveal what one needs to know.
>end
Can I take it that the Radial Wheel blowers are a high pressure design?
I believe you mentioned in a previous thread that these were also
comparatively quiet?
I have e-mailed both Kooltronics in the US and Airflow here in the UK so
I'll see what comes back.
I am still interested in what exact spec blower others who are using
with the YC-125 tube.
Many thanks.
Phil G4ZOW
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|