I remember these were discussed here not too long ago. It seems that they
were only good to about 2KV.
Mike(y)
W3SLK
----- Original Message -----
From: Mike Blier <w6ffc@pacbell.net>
To: George McCrary <geo@ipass.net>; <amps@contesting.com>
Sent: Tuesday, April 18, 2000 12:32 PM
Subject: Re: [AMPS] High Voltage Connectors?
>
> Here ya go. These are the "Standard" HV connectors..
>
> http://www.surplussales.com/Wire-Cable/HVWire-2.html
>
> Mike W6FFC
>
> ----- Original Message -----
> From: George McCrary <geo@ipass.net>
> To: <amps@contesting.com>
> Sent: Tuesday, April 18, 2000 8:46 AM
> Subject: [AMPS] High Voltage Connectors?
>
>
> >
> > Hello,
> >
> > I would appreciate some advice on what connectors would be
> > suitable to use on the cable connecting a high voltage supply (approx
> > 3 kV) to an rf deck.
> >
> > Also any information about a good source for said connectors
> > would be helpful.
> >
> >
> > Regards,
> >
> > George (KQ4QM)
> >
> > --
> > FAQ on WWW: http://www.contesting.com/ampsfaq.html
> > Submissions: amps@contesting.com
> > Administrative requests: amps-REQUEST@contesting.com
> > Problems: owner-amps@contesting.com
> > Search: http://www.contesting.com/km9p/search.htm
> >
>
>
> --
> FAQ on WWW: http://www.contesting.com/ampsfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|