Amps
[Top] [All Lists]

[AMPS] Impedance of amplifiers

To: <amps@contesting.com>
Subject: [AMPS] Impedance of amplifiers
From: measures@vc.net (Rich Measures)
Date: Sat, 17 Jul 1999 16:44:22 -0700


>
>> ?  For c. five years, the ARRL Handbook had the wrong Pi-L tank values - 
>> -  despite being repeatedly told about the problem.  .
>
>Is it easy to explain what is wrong about the values? 
>
?  The error was in C2,  Eventually it was fixed. 

>  > since 1995, the Handbook has had an inaccurate method of calculating RF
>> current in a DC blocking cap.  My guess is that it will remain there until
>> sometime around 2040.  .  
>
>What is the correct method?

? Calculate  the difference between instantaneous anode potential at max. 
conduction and anode supply potential.  Divide by 2^0.5 to convert peak v 
to RMS v. .  Disconnect the C1 side of the blocking cap.  Measure 
anode-C. with tube in socket  Calculate capacitive-reactance in ohms.  
Current=volts/ohms.    

?  later, Tom


Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>