>
>Hi Vic, from 1996 ARRL Handbook, DIODES IN SERIES, page 11.9:
>
>"There used to be a general recommendation to place a resistor across each
>diode in the string to equalize PIV drops. With modern diodes, this practice
>is no longer necessary." It goes on to explain why then concludes with:
>"In fact, shunt resistors can actually create problems..." and why again.
>
>The 1N5408 qualifies. I use 16 of these in each leg of a fullwave putting
>out 4KV - no probs.
>
With 16 diodes per leg and 4kV out, each diode c. 1/4 of its rated piv. .
I would be happy with a bit less safety factor, Bill
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|