Vic,
Your doing OK!
Ray C. KB8VU
QRO Tech
----- Original Message -----
From: Vic Rosenthal <rakefet@rakefet.com>
To: Amps reflector <amps@contesting.com>
Sent: Saturday, July 03, 1999 11:43 AM
Subject: [AMPS] PS diode equalizing
>
> What's the current view on equalizing caps and resistors across diodes in
> rectifier strings? The ARRL handbook says you should put a 0.01 mf
capacitor
> and (I think) 1000 ohms per volt resistor across each diode. I dimly
recall a
> discussion in which this was said to be *not* advisable. I'm using 5
1N5408's
> per leg of a fwb with 2400 vac input.
>
> 73,
> Vic, K2VCO
> Fresno CA
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|