The FT990 and FL7000 hookups according to the instruction manual for the 990
show the special cable connected from the FT990 via the BAND DATA connector
in the back of the rig to the FL7000 ACC-2 socket.
Talking to some others, it was mentioned that keying is accomplished through
the REMOTE connector on the 990, not the Band Data.
Does anyone have the real scoop ??
Thanks in advance
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|