Amps
[Top] [All Lists]

[AMPS] Re: Tuned Input for Clipperton

To: <amps@contesting.com>
Subject: [AMPS] Re: Tuned Input for Clipperton
From: jono@enteract.com (Jon Ogden)
Date: Thu, 11 Mar 99 15:03:28 -0600
>From Orr's Radio Handbook:
>
>Assuming total cath Z = 100-ohms, Q = 2     Shunt capacity reduces C
>
>values somewhat
>   Band            C1               C2           L
>from  predicted
>
>
>
>160             3300           2520          4.20
> 80               1700           1350          2.26
> 40               900              680            1.14
>  20               440              330            0.56
>  15               300              220             0.38
>  10               220              160              0.28

Don't forget as Hoff pointed out in his article in Ham Radio that on the 
higher frequencies, the impedance effects of the bias choke, socket, etc 
need to be taken into account.  This can and likely will change the value 
of C2.  In my amp, the values of C2 on 15M and 10M were quite different 
than the formulas predicted, while on 80, 40 and 20, they were about 
right on.

73,

Jon
KE9NA


--------------------------------------------------------------------------
Jon Ogden

jono@enteract.com
www.qsl.net/ke9na

"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>