I see the formatting changed !
+ and - should be over the two righthand pins
Peter Hodgson wrote:
> Hi Mary - Frances
>
> my 840 is connected as follows: looking at the rear of the connector on the
> cable
>
> CLIP
> - +
> O O O centre pin is squared
> - +
> O O O outer pins are squared
>
> hope that helps
>
> 73
> Peter
> VA3PKH
>
> ki0dz@space.com wrote:
>
> > Hello,
> > Does anyone know how to wire this? I'd like to make a backup cord much
> > shorter than the factory supplied one. Looks like it uses four conductors,
> > but neither the manual nor the schematics discuss the wiring of the power
> > connector. I have a FT-757 that has a strange wiring for the power
> > connector and that is detailed in the manual, but not for the 840.
> > Any help would be appreciated. Thanks.
> >
> > 73, Mary-Frances
> > ---------------------------------------------------------------------------------------------------------
> > Mary-Frances Bartels *** ki0dz@qsl.net (((#))) ^ ^
> > http://www.qsl.net/ki0dz Denver, CO | ^ - ^
> > Order Watkins Products www.watkinsonline.com ------- (o o)
> > Beyond Infinity - WWW Services ^#092389^ |ooOoo| >{ | }<
> > http://members.nbci.com/beyondin ------- RRR)*
> >
> > ___________________________________________________________________
> > Join the Space Program: Get FREE E-mail at http://www.space.com.
> >
> > --
> > FAQ on WWW: http://www.contesting.com/FAQ/yaesu
> > Submissions: yaesu@contesting.com
> > Administrative requests: yaesu-REQUEST@contesting.com
> > Problems: owner-yaesu@contesting.com
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/yaesu
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/yaesu
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
|