Hi Mary - Frances
my 840 is connected as follows: looking at the rear of the connector on the
cable
CLIP
- +
O O O centre pin is squared
- +
O O O outer pins are squared
hope that helps
73
Peter
VA3PKH
ki0dz@space.com wrote:
> Hello,
> Does anyone know how to wire this? I'd like to make a backup cord much
> shorter than the factory supplied one. Looks like it uses four conductors,
> but neither the manual nor the schematics discuss the wiring of the power
> connector. I have a FT-757 that has a strange wiring for the power connector
> and that is detailed in the manual, but not for the 840.
> Any help would be appreciated. Thanks.
>
> 73, Mary-Frances
> ---------------------------------------------------------------------------------------------------------
> Mary-Frances Bartels *** ki0dz@qsl.net (((#))) ^ ^
> http://www.qsl.net/ki0dz Denver, CO | ^ - ^
> Order Watkins Products www.watkinsonline.com ------- (o o)
> Beyond Infinity - WWW Services ^#092389^ |ooOoo| >{ | }<
> http://members.nbci.com/beyondin ------- RRR)*
>
> ___________________________________________________________________
> Join the Space Program: Get FREE E-mail at http://www.space.com.
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/yaesu
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/yaesu
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
|