I'm not rpelying to the specific e-mail but simply saying how
impressed I am with seeing Yaseu respond to questions and
issues via e-mail. It's great for Yaseu owners and gives Yaseu a
chance to respond to criticisms coming from the ham community.
Please keep it up! And whiel you are at it, could you tell me if the
FT100 operates full QSK?
On 14 Apr 99, at 9:41, Yaesu Technical Support wrote:
Dave,
Thanks for the email. The inside of the display glass can be cleaned in
about 2 hours. To access the glass, you'll need to take off the top and
bottom covers, drop the front panel down and remove the display unit.
To clean dust off the glass, you do not need to remove the display unit.
Compressed air may be used in the small gap between the display unit and
the glass to blow the dust away.
Please send me your mailing address and I'll mail you a copy of the
disassembly instructions and exploded view of the front panel if that would
assist you.
Best Regards, Mike Krueger - N6MIK, Yaesu Technical Support
At 4/12/99 04:52 PM, you wrote:
>Hi Folks,
>
>A friend just bought a FT-1000 and has noticed what appears to be a
>hazy film on the inside of the frequency display view glass. He called
>Yaesu and was told it would take 6hrs to remove the glass for cleaning.
>
>Does anyone on the list have any first hand experience with cleaning
>this
>display glass?
>
>HAVE FUN,
>dave
>
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
Robert L. Carroll W2WG
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|