On 12/30/2009 4:58 AM, Jim Orcheson wrote:
> Hi Gary and others.
>
> mmrtty.ocx is in C:\Writelog\Programs as it should be according to your
> comments below. BUT no MMTTY as a TU type.
>
> Has anybody had success with this combination of software?
>
> 73, Jim VA3HJ
>
>
> Gary AL9A wrote:
>> Jim,
>>
>> I don't have Windows7, but do run MMTTY V1.66G with WL V10.73D with the
>> MMTTY plug in. I think your problem may lie in where you are installing
>> things. I have MMTTY installed in the root directory C:\ rather than in
>> Program Files. This avoids the problem with the Virtual Store path with
>> User Account Control, which I hear Windows 7 also employs. I do have WL
>> installed in Program Files and the WL plug in must also be installed to the
>> WL program folder in Program Files. If the plug in is successful you should
>> find the file mmrtty.ocx in your WL Programs folder. I think this is what
>> makes MMTTY show up in the TU pull down menu. You then point it to your
>> MMTTY installation. Hope this helps.
>>
>> 73,
>> Gary AL9A
>>
>> ----- Original Message -----
>> From: "Jim Orcheson"<jim@va3hj.ca>
>> To:<writelog@contesting.com>
>> Sent: December 29, 2009 9:34 AM
>> Subject: [WriteLog] Problem with Writelog and MMTTY on Windows 7 64-bit
>>
>>
>>
>>> I am having a problem with Writelog and MMTTY on a computer running
>>> Windows 7 Home Premium 64-Bit as follows:
>>>
>>> I have installed Writelog v 10.73D, MMTTY v 1.66G, and
>>> MMTTYPluginForWritelog v 1.3. Writelog works OK, including Rttyrite,
>>> both send and receive. However, the TU type pulldown menu in Rttyrite
>>> does not list MMTTY at all.
>>>
>>> I have installed Writelog in C:\Program Files (x86) which is the
>>> default, MMTTY in C:\Program Files (x86) which is the default, and the
>>> plugin whereever it goes. This did not work.
>>>
>>> I uninstalled everything and tried again. I installed Writelog in
>>> C:\Writelog, then restarted the computer. I installed MMTTY in the
>>> default location and restarted the computer. I installed the plugin and
>>> restarted the computer. Still no MMTTY as a TU type.
>>>
>>> Am I missing something? Is there something that has to be added to the
>>> INI file?
>>>
>>> 73, Jim VA3HJ
>>>
>>>
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web: http://www.writelog.com/
>>>
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
Look at your c:\windows\writelog.ini file. There should be a [rttyrite]
section and a line pointing to the location of mmtty. See if that is
correct. If not try changing it to the correct location.
John N1JM
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|