I use Cellflex 1/2" cable on my crankup tower for more then 25 years
73
Peter
-----Original-Nachricht-----
Betreff: [TowerTalk] LMR-600UF ?
Datum: 2024-06-21T16:47:52+0200
Von: "jim.thom jim.thom@telus.net" <jim.thom@telus.net>
An: "towertalk@contesting.com" <towertalk@contesting.com>
Does anybody make a version of LMR-600UF that has a decent outer jacket on
it....like what's used on RG-213U ??
The outer jacket on LMR-600UF is super soft rubber, prone to knicks and
abrasion, and does not seem to be UV resistant.
Plan B is to use use 2" wide electrical tape, and cut it into say 24-30"
lengths, and run the tape inline with the LMR-600UF, then wrap it around
the coax jacket. Then the next 24-30" etc, etc.
This is for a crank up tower, and no, I don't want to use LMR-400UF or
213-U.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|