Towertalk
[Top] [All Lists]

Re: [TowerTalk] Feeding single band HF yagis 500+ ft from the shack

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Feeding single band HF yagis 500+ ft from the shack
From: Pete Smith N4ZR <pete.n4zr@gmail.com>
Date: Wed, 18 May 2022 14:45:58 -0400
List-post: <mailto:towertalk@contesting.com>
Given how much operating is being done these days using complex remote stations, it strikes me that a 10x10 hut at the base of the tower, with everything in there but the operator end, is entirely feasible and not even that expensive.  There are wifi extenders on the market that certainly could reach that far, and it wouldn't take many copper runs for RF, rotators and other control circuits to far exceed the cost.

73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<http://beta.reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.

On 5/18/2022 2:11 PM, Grant Saviers wrote:
I think it is not difficult to have *NO* wires or coax runs for multiple towers to transceiver using the Green Heron Everywhere (GHE) system and  "ether" ethernet and remote amplifiers.

GHE can be set up to wifi switch antennas, stacks, move rotators, and continuous tune and switch segmented tuned antennas.  My station does all of these via wifi receivers although they are connected from the single amp to the 3 towers with control wires and coax.

If lightning is a big concern this is the ultimate fix, all wireless. WWA is the lowest strike are in the US so while I'm well protected, it's not top of list for my QTH.

Most amplifiers now remote easily over ethernet/internet and that removes the long coax.  Ubiquiti for instance for links.

I think there other system choices than GHE.

Grant KZ1W
Redmond, WA

On 5/17/2022 19:27, john@kk9a.com wrote:
Of course this only works for stations with a single tower and the equipment
may be more easily damaged from lightning strikes.

John KK9A

Kelly Taylor ve4xt wrote:

Curious. at what point, given the cost of hardline, does one consider
running code-compliant power out to the towers, putting the RF components there and using either ethernet or fibre between the control heads in the
shack and the rf components?

Just a question. Flames will be ignored.

73, kelly, ve4xt

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>