You want to ensure the that the choke's self-resonant-frequency isn’t within
80m. I am using J.W. Miller 5252 chokes at the vertical base feed. Purchased
from Mouser.
Prior to installing the Miller chokes on 80m and 160m verticals, high-voltage
static was destroying my K3's SWR bridge Schottky diodes. Zero problems after
the chokes were installed.
Paul, W9AC
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Jamie WW3S
Sent: Sunday, December 16, 2018 9:17 AM
To: towertalk@contesting.com
Subject: [TowerTalk] rf choke for vertical?
I’ve read/heard that an rf choke from the vertical to ground will help bleed
off any static and help reduce noise levels on the vertical. For an 80m
vertical, running 1200 watts, is the value/rating critical?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|