Towertalk
[Top] [All Lists]

Re: [TowerTalk] Antenna Analyzers

To: "towertalk@contesting.com" <towertalk@contesting.com>, "jim@audiosystemsgroup.com" <jim@audiosystemsgroup.com>
Subject: Re: [TowerTalk] Antenna Analyzers
From: Máximo EA1DDO_HK1H <ea1ddo@hotmail.com>
Date: Thu, 6 Dec 2018 10:36:02 +0000
List-post: <mailto:towertalk@contesting.com>
I think is good to be clear that is quite different a VNA to use on the top of 
a tower or field, than on the bench, than in a lab.
You are talking about different things. All of them VNA but different targets, 
and prices.

VNWA is a very fine piece of engineering for HAM use, at bench. But in my case 
I need it for field/tower use as well, so a handheld unit is my view, good for 
tower and bench.

Most ham devices cover HF and some of them VHF. Good for a majority of users.
For those with UHF needs... best handheld VNA I know (not professional devices) 
is the KC901V or KC901S+.
http://www.deepace.net/kc901v-6-8ghz-handheld-network-analyzer-rf-multimeter/

It is a true two ports VNA, covering from 5 KHz up to 4 GHz or 7GHz, depending 
on the model.
It includes spectrum analyzer and TDR.
Check this video review: https://www.youtube.com/watch?v=LN9PKKdFibo&t=25s

73, Maximo

________________________________
De: TowerTalk <towertalk-bounces@contesting.com> en nombre de Jim Brown 
<jim@audiosystemsgroup.com>
Enviado: jueves, 6 de diciembre de 2018 0:55
Para: towertalk@contesting.com
Asunto: Re: [TowerTalk] Antenna Analyzers

On 12/5/2018 3:47 PM, Paul Christensen wrote:
>   All the analyzers mentioned have a HF or VHF frequency limit but I rarely 
> need measurements beyond VHF.

The FA-VA5 goes to 600 MHz, the VNWA 3e to 500 MHz with 90 dB dynamic
range, and 50 dB up to 1.3 GHz. Like you, I rarely need to measure
equipment or antennas above 6M. I do, however, do most TDR sweeps from
100-500 MHz, sometimes go higher to get greater time/distance
resolution. For those who don't know, the resolution of a TDR sweep
increases in direct proportion to the width of the sweep. By
"resolution," I mean the ability to see fine detail. I've never seen the
N2PK VNA, but have heard nothing but good things about it.

BUT -- last I heard, it only went to about 100 MHz, which is a
significant limitation for TDR. That's part of what comes with being
"early" -- having to design with older parts, or parts that are cheap
enough when you're doing your design.

73, Jim


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>