You might be able to figure it out by looking at these models:
http://www.kkn.net/~k5tr/k5tr-yo-files.html Personally I find it easier
to use insulated element brackets.
John KK9A - P40A
To: towertalk@contesting.com
Subject: [TowerTalk] Hy Gain Element to Boom Clamp conversion
From: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Date: Wed, 28 May 2014 06:47:05 -0400
I am currently rebuilding my six meter six element beam and would like to
use Hygain element to boom clamps. Are there any standard conversions for
element length different to a standard u-bolt or insulated top mounted
element clamp? I believe you are required to add the boom diameter to the
overall element length but is there any other consideration as a genera
rule? The Hy-gain clamps seem to be considerably more durable for yagi
construction than drilling a hole through the element and thus creating a
weak point.
Please let me know. Thanks
Herb Schoenbohm, KV4FZ
___________________________
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|