Towertalk
[Top] [All Lists]

[TowerTalk] Fwd: Fwd: Attach a PL-259 to a 1/2" hardline

To: towertalk@contesting.com
Subject: [TowerTalk] Fwd: Fwd: Attach a PL-259 to a 1/2" hardline
From: Hans Hammarquist <hanslg@aol.com>
Date: Wed, 7 Nov 2012 20:20:45 -0500 (EST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
No, this is a 75 ohms cable TV cable. It has a 1/2 " outside diameter shield.


Hans - N2JFS



-----Original Message-----
From: Pete Smith N4ZR <n4zr@contesting.com>
To: towertalk <towertalk@contesting.com>
Sent: Wed, Nov 7, 2012 9:22 am
Subject: Re: [TowerTalk] Fwd:  Attach a PL-259 to a 1/2" hardline


What sort of hardline was that, anyhow?  It sure didn't look like Heliax 
LDF4-50

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 11/7/2012 7:13 AM, Hans Hammarquist wrote:
> The compression coupling costs ~$8/pcs (Lower and Home Depot) and the flare 
coupling about the same, but is used for two attachments. I payed $1 for the 
PL-259 so the total cost for me was $5 per coupling plus about 10 minuter extra 
work (20 minutes to cut, drill and solder per two) per attachment.
>
>
> You can do the rest of the math. More important, I didn't now where I could 
get the "right McCoy".
>
>
> If you or somebody else have a link I will look in to it as I have several 
more to do.
>
>
> 73 de,
>
>
> Hans - N2JFS
>
>
>
> -----Original Message-----
> From: Drax Felton <draxfelton@gmail.com>
> To: 'Hans Hammarquist' <hanslg@aol.com>; towertalk <towertalk@contesting.com>
> Sent: Tue, Nov 6, 2012 9:04 pm
> Subject: RE: [TowerTalk] Attach a PL-259 to a 1/2" hardline
>
>
> How much cheaper is it than buying the right adapters?
>
>
>
> -----Original Message-----
> From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Hans
> Hammarquist
> Sent: Tuesday, November 06, 2012 7:25 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Attach a PL-259 to a 1/2" hardline
>
> I took some photos of my attempts to connect a PL-259 to "the common" 1/2 "
> hardline. The simple way is to use a 1/2 " compression union coupling but I
> also used a 1/2 " flare union coupling. That require soem "shop"-work but
> came out good (at least in my opinion.)
>
>
> http://www.facebook.com/media/set/?set=a.10152183316018539.483422.579753538&;
> type=1&l=b1cad3f418
>
>
>
>
> 73 de,
>
>
> Hans - N2JFS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>   
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>