Jim, ur welcome, and quite candidly, all that we have to sell is not on the web
site, yet. We're working on it, and it will be a while.
Tnx, Steve K1PEK
DAVIS RF Co., Div. of Orion Wire Co.
Wire, Cable, RF Connectors and wire aerial parts. LMR, Heliax, Eupen
Commercial / Military / & Custom Cable Design
tel: 978-369-1738 Fax: 978-369-3484
www.DavisRF.com
----- Original Message -----
From: Jim Rhodes
To: Steve Davis -Davis RF Co. ; towertalk@contesting.com
Cc: wtrone@comcast.net ; wi5a@sbcglobal.net
Sent: Friday, September 26, 2008 5:07 PM
Subject: Re: [TowerTalk] Cable Stripper Cost savings-Response by DAVIS RF Co.
Thanks for pointing this out. Wish I could find everything on your web site,
but it certainly is well hidden if it is there. When I am looking for something
at 2AM I don't like to disturb people & I am usually looking for information
NOW.
At 09:25 AM 9/26/2008, Steve Davis -Davis RF Co. wrote:
Hi Folks, The RFA-4087, as Larry points out, is a real good stripper.
Sold
for $ 48 or more elsewhere (above the mfr. suggested list), we sell it for
$
36.00, below mfr. sug. list). We also have crimp tools with
interchangeable die (vs. many you have to buy the tool with permanently
affixed die for one cable or similar sized cables).
Any parts, tools, PolyPhaser, etc. related to our core biz of wire,
cable and custom cable design, please run by me as I think you will always
find the price, tech insight, product experience and Customer Satisfaction
to be noteworthy.
73, Steve , K1PEK
DAVIS RF Co., Div. of Orion Wire Co.
Wire, Cable, RF Connectors and wire aerial parts. LMR, Heliax, Eupen
Commercial / Military / & Custom Cable Design
tel: 978-369-1738 Fax: 978-369-3484
www.DavisRF.com
TowerTalk@contesting.com:
I really like the RFA-4087 from RF Parts
(http://www.rfparts.com/coax_accessories.html , under "Coax Strippers and
Prep Tools" toward the bottom of the page). Sells for $48.90 and works with
LMR-400, LMR-400UF, RG8, 213, 214 and 9913 per their catalog. I used mine on
regular LMR400 for a complete antenna installation at my new QTH. Never had
to change the blades. It looks like a cheap-o plastic stripper in the
catalog, but it is die-cast zinc and heavy duty. I have used the Ripley
Cablematic on RG-8 and much prefer the RFA-4087. These are really slick.
Couple one of these with a crimp connector made for the LMR-400 and you have
a solid, quick connection.
- Larry K5RK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
Jim Rhodes K0XU
jim@rhodesend.net
Experience is the thing you have left when everything else is gone.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|