Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cable Stripper Cost savings-Response by DAVIS RF Co.

To: "Steve Davis -Davis RF Co." <sdavis@davisrf.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Cable Stripper Cost savings-Response by DAVIS RF Co.
From: Jim Rhodes <k0xu@longlines.com>
Date: Fri, 26 Sep 2008 16:07:34 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks for pointing this out. Wish I could find everything on your 
web site, but it certainly is well hidden if it is there. When I am 
looking for something at 2AM I don't like to disturb people & I am 
usually looking for information NOW.

At 09:25 AM 9/26/2008, Steve Davis -Davis RF Co. wrote:
>Hi Folks,  The RFA-4087, as Larry points out, is a real good stripper.  Sold
>for $ 48 or more elsewhere (above the mfr. suggested list), we sell it for $
>36.00,  below mfr. sug. list).   We also have crimp tools with
>interchangeable die (vs. many you have to buy the tool with permanently
>affixed die for one cable or similar sized cables).
>
>    Any parts, tools,  PolyPhaser, etc. related to our core biz of wire,
>cable and custom cable design,  please run by me as I think you will always
>find the price, tech insight, product experience and Customer Satisfaction
>to be noteworthy.
>73,   Steve ,  K1PEK
>
>DAVIS RF Co.,   Div. of Orion Wire Co.
>
>Wire, Cable, RF Connectors and wire aerial parts.   LMR, Heliax, Eupen
>
>Commercial / Military / & Custom Cable Design
>
>tel:  978-369-1738     Fax:  978-369-3484
>www.DavisRF.com
>
>
>
>    TowerTalk@contesting.com:
>I really like the RFA-4087 from RF Parts
>(http://www.rfparts.com/coax_accessories.html , under "Coax Strippers and
>Prep Tools" toward the bottom of the page). Sells for $48.90 and works with
>LMR-400, LMR-400UF, RG8, 213, 214 and 9913 per their catalog. I used mine on
>regular LMR400 for a complete antenna installation at my new QTH. Never had
>to change the blades. It looks like a cheap-o plastic stripper in the
>catalog, but it is die-cast zinc and heavy duty. I have used the Ripley
>Cablematic on RG-8 and much prefer the RFA-4087. These are really slick.
>Couple one of these with a crimp connector made for the LMR-400 and you have
>a solid, quick connection.
>
>- Larry K5RK
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

Jim Rhodes K0XU
jim@rhodesend.net

Experience is the thing you have left when everything else is gone. 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>