Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crank up Winch Cable Replacement

To: jcowens1@comcast.net
Subject: Re: [TowerTalk] Crank up Winch Cable Replacement
From: "Charles Mills" <w3yni1@gmail.com>
Date: Sat, 10 May 2008 12:29:12 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I was using WD40 before buy recently bought the stuff Steve sells on his
website.  Have an Aluma Crankup and want to keep it "healthy" for as long as
I can.
Chuck

On Sat, May 10, 2008 at 12:23 PM, <jcowens1@comcast.net> wrote:

> You are very likely to get a response from K7LXC on this one. I agree with
> him that unless the cable shows some indication of imminent breakdown
> (broken strands, excessive corrosion, etc.) it is probably still ok. My
> Triex 72 ft crank up had the original winch cable on it when it blew down 3
> years ago. It was over 20 years old. My current US Tower 72ft motorized
> tower, which is about 15 YO, still has the original cables on it.
>
> I have purchased a replacement cable set and will put them on some day. I
> inspect the cables regularly and they always look fine to me. I believe that
> UST recommends every 3 years, but that is probably out of concerns for
> liability. On the US Towers, you have the option of stopping the tower
> resting location at different points and that helps extend the cable life by
> shifting the pully stress points on the cables.
>
> I apply wire rope lube (spray on) to all my winch cables and that helps
> extend the life many years.Be sure and use this stuff.
>
> John Owens - N7TK
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>



-- 
=====================================
Charles L. Mills
Email: w3yni1@gmail.com
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>