Towertalk
[Top] [All Lists]

[TowerTalk] Crank up Winch Cable Replacement

To: dxdx@optonline.net
Subject: [TowerTalk] Crank up Winch Cable Replacement
From: jcowens1@comcast.net
Date: Sat, 10 May 2008 16:23:00 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
You are very likely to get a response from K7LXC on this one. I agree with him 
that unless the cable shows some indication of imminent breakdown (broken 
strands, excessive corrosion, etc.) it is probably still ok. My Triex 72 ft 
crank up had the original winch cable on it when it blew down 3 years ago. It 
was over 20 years old. My current US Tower 72ft motorized tower, which is about 
15 YO, still has the original cables on it. 

I have purchased a replacement cable set and will put them on some day. I 
inspect the cables regularly and they always look fine to me. I believe that 
UST recommends every 3 years, but that is probably out of concerns for 
liability. On the US Towers, you have the option of stopping the tower resting 
location at different points and that helps extend the cable life by shifting 
the pully stress points on the cables. 

I apply wire rope lube (spray on) to all my winch cables and that helps extend 
the life many years.Be sure and use this stuff.

John Owens - N7TK 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>