The bolts that hold the rotor to the base plate.
Kim Elmore wrote:
> Which bolts? The onse that mount the rotor to the base plate, the
> ones that hold the rotor housing together, or the ones that hold the
> mast clamp?
>
> Kim Elmore, N5OP
>
> At 06:00 PM 10/28/2007, Barry wrote:
>
>> My previous T2X was up on my Rohn 45 for 15+ years, no problems. I
>> recently replaced it, and today noted antennas spinning in the wind. I
>> climbed up and saw all the bolts were gone except one, which was loose.
>> I didn't do this installation, but did the first one, and didn't do
>> anything special (Locktite, etc.) to secure the bolts. Did I get lucky
>> the first time? Any ideas why they loosened up, and what should be done
>> to prevent it in the future? This latest installation has only been up
>> a month or two.
>> Tnx,
>> Barry W2UP
>>
>> --
>>
>> Barry Kutner, W2UP Newtown, PA
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
--
Barry Kutner, W2UP Newtown, PA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|