How about a hexbeam? Don't know if they have one set up for that, but
it wouldn't be too hard to make one from a 10,15 duobander. Just add
the 12 element.
At 12:04 PM 3/12/2007, KD5SFA wrote:
>I've got a Kenwood TS-660 that I am looking
>to dedicate a small HF beam to. I have a 3el
>yagi for 6m that I will also be using but would
>like to small beam just for the HF side as well. This
>will be all QRP operation. I may consider something
>along the lines of a MA5B as I can use my 706MKIIG or
>TS-850S/at with. Currently I have a 170' run of RG-8U
>from my temporary station to the apex of my OCF dipole
>at 53'. It's cut for 80m. I want to do something
>closer to my station on a pushup pole (bracketed to
>house and top guyed) or 30' of tower (bracketed to house)
>so that my run is 50' or less.
>
>73,
>Jon
>KD5SFA
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
Jim Rhodes K0XU
jim@rhodesend.net
Experience is the thing you have left when everything else is gone.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|