I should have added that the BN-4000B does use teflon coax RGU-303 ?
(hard to read the markings - its about the same size as RG-58/U) and 45
ferrite beads.
73, Charles, K4ZRJ
Clint Talmadge wrote:
> It thought the HyGain Balun is supposed to be a current balun, which to my
> understanding is just ferrite beads on coax. If this were true, the balun
> would show no resistance from the center pin of the connector to one
> attachment point and infinite resistance to the other.
>
> Not so.... No resistance from/to any of the 4 accessible points (two element
> attachment points, center pin of connector and outer shell of connector).
>
> Has anyone ever had one of these apart and could explain the configuration ?
>
> I need this information because in my use of the balun, it makes a difference
> which side is center conductor and which side is shield.
>
> Clint - W5CPT
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|