It thought the HyGain Balun is supposed to be a current balun, which to my
understanding is just ferrite beads on coax. If this were true, the balun
would show no resistance from the center pin of the connector to one attachment
point and infinite resistance to the other.
Not so.... No resistance from/to any of the 4 accessible points (two element
attachment points, center pin of connector and outer shell of connector).
Has anyone ever had one of these apart and could explain the configuration ?
I need this information because in my use of the balun, it makes a difference
which side is center conductor and which side is shield.
Clint - W5CPT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|