Folks
After reading all the discussions regarding antennas, I?ve become more
attuned to minor details.
Last night I was bolting the mast mounting bracket onto my KLM 10-30 LP and
I noticed that one of the phasing straps comes within 1/2 inch of the mast
mounting plate. Not knowing enough about antenna construction/design, should
I be concerned, or is it simply a case of too much knowledge causing
worries?
I would "assume" that since this is the way the antenna was designed that it
would not cause a problem. But...
Thanks for the thoughts.
Bill KA4GAV
?
----------------------------------------------------------------------------
---------
Bill Turini???????????????????????????????????? (425) 787-4477
IT & Facilities Manager
Cypress Semiconductor - Washington Design Center
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|