On Sat, 26 May 2001 22:19:38 -0700, Stan or Patricia Griffiths wrote:
>For most of
>us, it means more than just telescoping the elements out a
>little farther. I doubt there is enough spare aluminum in
>your current beam to do this.
_________________________________________________________
To go from 7.0 to 6.9 MHz, just add approximately 5.5 inches to the end of each
element. It does not have to be aluminum tubing, just a piece of stiff wire
would do fine.
73, Bill W7TI
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|