Topband
[Top] [All Lists]

Re: Topband: QRM Eliminator

To: topband@contesting.com
Subject: Re: Topband: QRM Eliminator
From: Pete Smith N4ZR <pete.n4zr@gmail.com>
Date: Sun, 9 Oct 2022 22:23:27 -0400
List-post: <mailto:topband@contesting.com>
Funny (I guess) - we have Chinese manufacturers cloning a Russian design.

73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<https://reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.

On 10/9/2022 12:35 PM, K4SAV wrote:
This link shows a schematic of this thing. (Assuming it's the same as the packaged version.)
https://tinyurl.com/3pkvzdft

Jerry, K4SAV

On 10/9/2022 10:59 AM, Tree wrote:
Looks like there is a low cost version of the ANC-4 and MFJ-1026 type of
noise eliminator available on Amazon of all places.

Search for QRM Eliminator.  Cost is around $60.

These are useful if you have a single point noise source.   I do not have one of these units but was "reading the mail" on someone talking about it
on 40M SSB and they seemed to think it worked well.

And he had a good point - if you don't like it - you can send it back for a
full refund!

Tree N6TR
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
<Prev in Thread] Current Thread [Next in Thread>