It will.
Confirmed in a number of installation.
YMMV as always.
Limiting factor is losses in this and similar lines.
Affects only reverse/away direction signal level.
Depends on particular Insulation properties.
Another issue is matching.
Not all of WD1 is made to the same specification and has different line
impedance.
Miss matching may degrade overall performance too.
сб, 9 мая 2020 г. в 20:15, Mikek <amdx@knology.net>:
> That brings up the question, can you use a tightly coupled pair for a
> reversible Beverage?
> And would WD-1 wire work?
> > http://www.signalcenter.com/commo/wire/wireinfo/wdwireinfo.html
>
> Mikek KF4ITA
>
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
--
Andrey Fedorishchev,
RA6LBS
http://lowbandsystems.com/
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|